How the Violin Makes Sound

The body of the violin is a hollow space that functions as an amplifier for vibration. The strings are suspended above the body by a bridge, a small piece of maple wood, which stands on the belly of the violin between the F holes and which is secured to the belly by the tension of the strings. The vibration from the stings is transferred through the bridge to the body of the instrument via the internal sound post. Vibrations are amplified as they meet the hard wood at the back of the instrument and come out through the soft front body and the F holes.

The F holes serve to connect the air on the inside of the instrument to the air outside. As a result of their length and shape, they allow the part of the belly between the holes to move more easily and to vibrate more freely than the other parts of the instrument.

OLYMPUS DIGITAL CAMERA

The sound-post, the small upright piece of wood inside the violin, prevents the belly from collapsing under the tension of the strings and couples the vibrations between the stiffer back plate and the bridge. The position of the sound-post is critical to the sound of the instrument. The bass-bar sits inside the belly on the bass-foot side of the bridge, the side under the G-string or bass end of the instrument. This extends beyond the length of the F holes and transmits the motion of the bridge over a large area of the belly.

The air inside the instrument vibrates, exactly like the air in a bottle vibrates when you blow across the top of it.

OLYMPUS DIGITAL CAMERA

The violin does not work like an electric amplifier. An electric amp takes a signal with a small amount of power and uses electricity to turn it into a more powerful signal. On the violin, the sound produced by the body of the instrument is created entirely with energy put into the string from the bow. The body of the violin is designed to make the conversion process of vibration to sound optimally efficient. A string on its own makes little sound.

Vibration of the violin strings can be achieved by plucking the strings, which is called pizzicato, or by drawing a bow across them, which is called arco. There are several other ways of making sound, known as extended techniques, which include col legno playing -hitting the string with the wood of the bow- or even tapping on the body of the instrument to make percussive noises.

The bow is strung with horsehair, normally about 150 to 200 hairs from a horse’s tail. Rosin, tree resin mixed with wax, is applied to the hair to increase friction. The surface of the hair shaft looks a little like the tiles on a roof, and the rosin adheres to the raised areas on the surface. Without rosin the hair is too smooth and will slide over the string with virtually no sound.

Cellobow from horse hair fiber - under microscope

As the bow is drawn across the string, the air molecules in and around the violin move backwards and forwards, varying the air pressure by tiny amounts. The number of oscillations or vibrations of air pressure per second is called the frequency and is measured in cycles called Hertz (Hz). The pitch of a note is determined by the frequency, for example, 440 Hz, or 440 vibrations per second is the note A in the treble clef, the pitch of the A string. 220 Hz is exactly one octave lower, the A played with the first finger on the G-string.

The pitch of the vibrating string also depends on its thickness. A thicker string will sound lower than a thin one. The tension of the string also determines pitch: the higher the tension, the higher the note. Another differentiation is the length of the string that is free to vibrate. As fingers are added to the string on the fingerboard, the pitch of the note gets higher as the string is effectively shortened. Harmonics produce another mode of vibration, in which the sound waves produced by the string are a fraction of the length of those normally produced.

Here Mark Wood demonstrates the physics of sound on his seven string electric fiddle. This is an extreme example of how the pitch works across the instrument, but it is also clear that the resonance created with electrical signals is very different to that of an acoustic violin with all its nuances of shape.

Tone Production with the Bow

The three main points of violin technique that have an impact on the sound are the weight, speed and point of contact with the bow. The bow must always be drawn at a right angle to the bridge, in a straight line between bridge and fingerboard. Simon Fischer describes this constant point of contact like the needle of a record player in the groove of a vinyl record.

Once the bow technique is developed to allow the flexible, spring-like action in the right arm and bow, the three aspects of tone production and nuance can be explored.

Speed of Bow

The faster the bow stroke, the greater the energy that is transmitted to the violin. If bow pressure remains constant, a change in speed will produce an increase in volume. Decreasing the speed will mean the sound gets quieter. For a musical phrase that requires a constant dynamic, therefore, an equal bow speed should be maintained throughout. A frequent mistake is to use too much bow at the beginning of the stroke and run out towards the end.

Pressure

The pressure of the bow on the strings comes from the weight of the bow itself, the weight of the arm and hand, controlled muscular action, or a combination of the these factors. The bow is heaviest at the frog and therefore whenever an even dynamic is required the pressure must be stronger towards the point. The amount of pressure helps determine the volume of the sound, but the quality of pressure is also important. Too much pressure crushes the string and actually prevents it from vibrating, and can even result in a change of note if the string is pulled too hard. The weight of the hand and arm and the pressure from the muscles must be transferred with freedom of movement and without tension. For example, a rigid right shoulder detracts from the ability to properly use the weight of the arm to apply pressure to the string.

Watch this tutorial by Yehudi Menuhin in which he demonstrates a series of exercises for developing a fluent, flexible right hand:

Sounding Point

The third factor in tone production is the sounding point or point of contact. This is the point in relation to the bridge where the bow has contact with the strings. The optimal sounding point changes in relation to the varying speeds and pressures of the bow, and to the length and thickness of the string. On thinner strings the sounding point is nearer to the bridge than on thicker strings; in higher positions it is closer to the bridge than in lower positions.

Tartini Tones

A further acoustic phenomenon, which Giuseppe Tartini used in his compositions to great effect, also has an impact on tone production. When thirds or sixths are played on the violin, especially on the A and E strings, a third note sounds well below the pitch of the two written notes. These resultant tones, also known as Tartini tones, exist when any two notes are played simultaneously. The pitch of the third tone should be consonant with the double stop. By awareness of these tones, intonation and resonance reach a new level.

Here is Tartini’s Devil’s Trill Sonata. Listen the depth of tone in the double stops.

LEARN VIOLIN

41 Whitcomb Street
London, WC2H 7DT
ENGLAND

Email: [email protected]
Phone: +44 (0) 20 3051 0080
© Copyright 2022 - ViolinSchool - All Rights Reserved
LONDON, UK
chevron-down linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram